Compact, Controlled Performance The Striker™ 0.35 cu yd stainless steel hopper spreader delivers reliable, low-maintenance performance with more control. The 0.35 cu yd model is designed to allow material to flow smoothly and efficiently, and is purpose-built with many of the same features of our larger Striker hopper spreaders but at the right size for UTVs and compact trucks. SPECIFICATIONS Body Side Length: 30" (0.8 m) Capacity: 0.35 cu yd (0.3 cu m) Hopper Construction: 16 ga SS (1.5 mm SS) Hopper Dimensions (LxWxH): 30" x 38" x 26" (76.20 cm x 96.52 cm x 66.04 cm) Overall Dimensions (LxWxH): 57" x 38" x 46" (144.8 cm x 96.5 cm x 116.8 cm) Min. Bed Length Required: 30" (76.20 cm) Approx. Weight (Empty): 235 lb (106.6 kg) Motors: Dual Electric, 12V DC Sealed Conveyor Width: 11.5" (29.2 cm) Spinner Size: 12" (30.5 cm) Spreading Width: Up to 30' (Up to 9.1 m) Material: Bagged Rock Salt, Bulk Salt, 50/50 Salt/Sand Mix, Sand Vehicle Application: UTVs & Compact Trucks UNIQUE FEATURES Corrosion-Resistant Hopper: The low-maintenance, stainless steel, riveted construction provides durability for long-life and protection against stress. Innovative Chute Design: Reduce material waste with this innovative chute design. Baffles within the chute deliver material to the areas of the spinner that cast it out and away from the truck, instead of back onto your bumper. Material Delivery: Features a 11 1/2"-wide pintle chain conveyor system that moves material consistently and smoothly to prevent bridging. Spinner & Spreading Width: An extra large 12" polyurethane spinner delivers a spread pattern of up to 30' and provides long-lasting, corrosion-free performance. Dual Electric Motors: A fully enclosed 12-volt electric, 1/3 HP motor is mounted inside a sealed housing, protecting it from corrosion. Dual Variable-Speed Control: Enhanced dual variable-speed control allows you to precisely match material delivery and spread patterns to conditions. Four standard accessory buttons and a dedicated blast button provide optimum in-cab efficiency. Easy-to-understand, digital self-diagnostics alert the operator when the hopper is empty or when adjustments are needed, and LEDs make the controls easy to read. Its compact size compared to traditional controls fits easily into today's modern UTV cab designs. Dump Button & Work Light: Located at the rear of the hopper, two dump buttons run the conveyor for easily unloading excess material. Controlled by a third button, an accessory work light can be attached to illuminate the area at the rear of the spreader for better visibility when operating the dump buttons or working at the back of the hopper. Fleet Flex Electrical System: The Striker™ hopper spreader is designed with FLEET FLEX technology for easy interchange between electric hopper spreaders without having to change the wiring or the controls. It provides easy operation, increased reliability, simple wiring and easy installation. Additionally, accessories automatically integrate into the control for easy plug 'n' play. Flip-Up Chute: Provides convenient access to the hitch, better ground clearance and easy clean-out. Accessory Integration: Conveniently connect accessories directly into the fully enclosed accessory hub mounted in the back of the hopper. Accessories automatically integrate with the hopper control without having to run additional wires from the front of the vehicle. Accessory Knock-Outs: Hoppers feature knock-out holes for plug and play integration of certain accessories. Shutter Deflector: The easy-to-adjust circular shutter deflector allows one-side spreading operation, providing optimal control by keeping materials away from areas they aren't needed, and spreading more evenly where they are. Top Screen: The standard coated steel top screen helps break up large chunks of de-icing material during the loading process to help prevent clogging and bridging during spreader operation. GENERAL Weight 235 lb. (106.6 kg) Hopper Capacity 0.35 cu yd (0.3 cu m)